Woodworking engraving machine is one of the more commonly used carving machines. It is widely used in wood carving. The following is a brief introduction to the positioning of woodworking engraving machine.
The first thing to do is to start with the fixed data. The fixation here is not to say that the data is fastened with the splint, and the information is still correct. Use our woodworking engraving machine to accurately align the data, install a straight knife on the spindle, then drop the tool onto the table, run along the side of the data, and use a side of the data and a direct gap of the tool. Come to find the information. Correct the data in the future. Then proceed to the next job to determine the workpiece origin of the data.
The determination of the X direction and the Y direction is the same method. Here we only say the X direction. First, finely adjust the tool to the left side of the data, and gently roll the tool by hand until the tool just touches the data, then clear the left side of the X workpiece to the left side, then lift the tool to the right, the same is Just touch the tool to the right side of the data and note the X workpiece coordinates at the moment. Then the general orientation of this value is the center of the data X direction. The Y direction is also the same. In this way, the center of the woodworking engraving machine in the X and Y directions is determined, which is equivalent to the origin of the workpiece.
The selection of wooden doors is mainly solid wood, especially solid wood composite materials, which preserves the advantages of natural wood and avoids the defects of easy deformation and cracking. The selection of materials is important, but in the manufacturing process, sophisticated. Traditional craft manufacturing processes have gradually been replaced by mechanical manufacturing. As a new favorite of wood door manufacturing, woodworking engraving machines have been loved by more and more wooden door manufacturers. First of all, as mechanized equipment, it is more powerful than manual manufacturing, and the scrap rate is extremely low. The woodworking engraving machine adopts the gantry structure and the bed of heavy steel structure to ensure the overall stability of the machine. The rack drive makes the transmission smooth, ensuring long-term high-speed operation without deformation and no vibration. In this way, when the precision wooden door is carved, the precision and beauty of the carving can be ensured, and then the power of the wooden door manufacturing is greatly improved.
The traditional craft wooden door system has to do many times according to the artificial practice factors, the output is low, and the cost is high. Now the wood door produced by the woodworking engraving machine is used, and the carved picture is more beautiful, and it is suitable for batch production.
With the rapid development of the real estate industry, the demand for high-grade wooden doors has gradually emerged. The choice of woodworking engraving machine has a good effect on dealing with this problem. Choosing a good woodworking engraving machine is not only satisfactory in terms of application, but also in the manufacturing process of the product. The woodworking engraving machine developed by Chengdu Kexing according to the needs of the market is the best choice for all kinds of wooden door carving and milling. The machine has been well received by consumers since it was put into the market for two years.
