How to make SKF bearing extended life

Transmission SKF bearing is a kind of central nervous situation in the rigid operation. In order to ensure the normal situation of the transmission shaft, the result of life extension can be extended in this respect. In the utilization, we should make the following points too fine;

1. In order to ensure the dynamic balance of the SKF bearing, the fine balance soldering piece should be desoldered. The new drive shaft assembly is provided with the device logo of the thin telescopic sleeve when the new drive shaft is loaded, and the flange fork should be wrapped in a plane. When repairing and disassembling the drive shaft, the device mark should be printed on the telescopic sleeve and the flange shaft, so that the original device can be stabilized when the device is reinstalled.

2. It is strictly forbidden to start with a high-speed gear.

3. It is strictly forbidden to lift the clutch pedal.

4. It is strictly forbidden to overload the car and speed.

5, should always be added to the universal joint SKF bearing grease, seasonal differences, the use of grease is not the same, such as the summer should be injected with No. 3 lithium-based grease, in winter, the second lithium-based grease.

6. Should check the fastening environment of the drive shaft hanger every time, whether the supporting rubber is damaged, whether the connection parts of the transmission shaft are loose, and whether the transmission shaft is deformed.

7, should always check the situation of the drive shaft.

SKF bearings also have a special environment in this situation. In the face of this aspect of change, all aspects of the situation have affirmative changes, and this day's maintenance role is a kind of handling from this aspect. The situation embodied.

For more information and purchase please visit: https://www.supplyforever.com

Correct maintenance and maintenance methods for KOYO bearings

First of all, when the spindle KOYO bearing in the spindle is in operation, it is necessary to fully ensure the lubrication, and the lubricant is periodically added according to the actual use condition, and the oil cannot be cut off for a long time. Therefore, for the user company, it is better to use a better and more suitable spindle lubricant. The new special spindle oil can significantly improve the lubrication performance, extend the oil change interval, extend the service life of the spindle and KOYO bearings, and also has good rust and corrosion resistance.

Secondly, the world's imported KOYO bearing products have a total specification of about 150,000 KOYO bearings with reinforced nylon material cages. The use temperature should be lower than 120 °C.

In addition, care should be taken when cleaning and cleaning the spindle to prevent damage and scratching the surface of the roller. To remove the residue of KOYO bearing parts as much as possible, it is better to use the method of washing and sucking the inside of the ingot to clean the residual oil. Care should be taken to avoid the use of the dumping type to cause the accumulation of cleaning waste to remain in the KOYO bearing part, resulting in problems such as noise and wear failure of the KOYO bearing.

For more information and purchase please visit: https://www.supplyforever.com