When using a wood engraving machine, it is necessary to maintain. A very important issue in the maintenance of the engraving machine is the lubrication problem. Many engraving machines are not easy to maintain due to lubrication, and eventually they are damaged and cannot be used. So, what should be done with this kind of maintenance before it can be done? Xiaobian today will tell you about the lubricating oil on the engraving machine.
First of all, it is the frequency of the lubricating oil. Here, the woodworking machine manufacturer reminds everyone that the more often the machine is used, the more lubricant is needed. why would you said this? Because the parts of the lubricating oil on the engraving machine are mostly sliding slides, these parts of the screw. If it is an engraving machine in use, these parts are not prone to blockage, rust, etc. due to frequent use. The engraving machines that are not used often will be rusted because of the moisture in the air, so they need to be lubricated.
Second, how is the lubricant. Xiaobian suggested that you choose a professional lubricant, such a lubricant is better, last time can be used for a long time. The purpose of lubricating oil is not only to prevent rust, but also to prevent an increase in friction loss. Therefore, it is also necessary for the lubricating oil on the machine in use, especially those screw rods and slides that often have frictional losses. After lubricating oil, the effect will be better.
