When the woodworking engraving machine is working, there may be a phenomenon that the engravings are misplaced. The equipment summarizes five methods for avoiding the engraving of the engravings for your reference:
1. For those irregularly shaped product raw materials, the surface seems to have been fixed very tightly, and will also sway back and forth when subjected to downforce. At this point, you can try to put some scrap under the object to increase friction. The other is to keep the package that comes with the item. Although the object is irregularly shaped, the package itself may be very regular and easy to be fixed. Together with a small strip, the irregularly shaped object is very It is easy to be fixed. Or try to fix the part of the rule and discard its irregular parts.
Engraving machine
2. If the downforce to be engraved is large, consider whether you must use a cone-shaped nose. If the diamond head of the engraving machine moves too much during the engraving process, the pressure on the side of the tool will cause the engraving. The movement. If you use an incorrect diamond knife, it will cause the same problem. A 90 or 100 degree diamond knife will drill deep into the material, causing the material to move during the engraving process.
3, because the engraving machine is often equipped with multi-function pliers or chucks, and they are made of iron, so it is easy to damage the engraved objects or make them fall during the engraving process, then use some rubber caps or rubber tubes It is helpful to fix the engraved object.
4. For engraving plastic patterns, you can attach the transfer tape to the back side of the engraved object, then spray the liquid glue on the side with the tape attached, and then attach it to a surface that can be discarded. This avoids the use of double-sided. Glue, leaving a surface that is difficult to clean. Because the transfer tape is easy to peel and clean. Using a special engraved strap, the side of the strap is more viscous than the other side, so the plate can be moved or replaced at will.
5. Check whether the pliers or chucks selected for engraving are used incorrectly. At the same time, the wear of the engraving machine pliers or the chuck will also cause the misalignment of the engraved objects. If the pliers or the chuck is too tight, the moment the blade touches the engraved object will also cause the engraving to pop out.
