What are the reasons for the misplacement of woodworking engraving machines?
The phenomenon that the woodworking engraving machine is misplaced during the engraving process is a common thing, because there are many problems in it, and there are many parts involved, so it is a problem that is difficult to solve. Below we summarize the following aspects for everyone. Reference:
1, the reason of the driver: the structure of the drive itself or the electronic components have problems will also cause misalignment, this is the most; if the number of occurrences is not much, and the speed is lowered, sometimes can be carved normally, indicating that the drive has not It is completely broken. If the engraving is misplaced at the beginning, the drive is completely broken. This can repair or worse the drive.
2. The reason of voltage: The power required during operation is large. If the voltage is too low, the power supply to the driver is insufficient. If the power is not reached, the misalignment will occur. Generally, the y-axis is the most. This phenomenon may be caused by insufficient external voltage. Or someone on the same line uses high-power equipment such as electric welding. The best way to solve this problem is to install a 50,000 watt regulated power supply. However, the error range of this regulated power supply cannot exceed 5%, preferably within 3%. .
3, the interface board, motherboard, adapter board reasons: If the interface board, motherboard, adapter board is broken, the machine in the process of working, a certain direction or three axes are not moving, resulting in engraving misplacement.
4, spindle motor reasons: If the stepper motor or servo motor, the whole machine does not move in a certain direction, the hand screw can not turn.
5, the cause of the fuselage itself: a certain part of the machine tool has problems or loose, the surface has impurities, etc. will also appear misplaced imagination, such as the coupling is loose, broken, there will be misalignment, the guide rail, the screw on the time is not Misplacement can also occur when cleaning and refueling.
6, the engraving machine machine line should be broken if this phenomenon occurs.
