1, the cleaning of the bearing
When disassembling the lower roller bearing for inspection, first record the appearance of the FAG bearing, confirm the residual amount of the lubricant, and then wash the bearing after sampling the lubricant for inspection. As a cleaning agent, gasoline and kerosene are commonly used.
The cleaning of the removed bearing is divided into coarse cleaning and fine fine washing. In the container, the metal mesh bottom is placed first, so that the FAG bearing does not directly contact the container. When rough cleaning, if the bearing is rotated with dirt, it will damage the rolling surface of the bearing and should be noted. In the rough cleaning oil, use a brush to remove the grease and the adhesive. After it is almost clean, it is transferred to the fine wash.
Fine washing is to carefully clean the spherical roller bearing while rotating in the cleaning oil. In addition, the cleaning oil should always be kept clean.
2. Inspection and judgment of bearings
In order to judge whether the disassembled spherical roller bearing can be reused, it is necessary to check after the bearing is cleaned, carefully check the raceway surface, the rolling surface, the state of the mating surface, the wear of the cage, the increase of the FAG bearing clearance and Whether there are damages or abnormalities in which the dimensional accuracy is lowered. For non-separable ball bearings, use one hand to support the inner ring and rotate the outer ring to check if it is smooth.
Separate bearings such as spherical roller bearings can be inspected separately for the rolling surfaces of the rolling elements and the outer ring.
Large bearings cannot be rotated by hand. Pay attention to the appearance of rolling elements, raceways, cages, ribs, etc. The higher the importance of FAG bearings, the more careful inspection is required.
For more information and purchase please visit: https://www.supplyforever.com
